Free zombie SVG

Zombie face with a stitched scar SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Zombie face with a stitched scar, as a solid black shape
Zombie face with a stitched scar. The preview is the SVG file itself.

A lopsided head with one big eye and one small, a stitched scar on the brow, a chewed ear, tufts of hair and a crooked mouth with four teeth. Every eye and tooth stays joined, so it cuts as one piece.

What is in the file

Size82 × 100 mm (3.22 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length707 mm at this size
Narrowest part1.3 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 1,652 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.82 × 1 in (21 × 25 mm)0.33 mm180 mm110Too fine for most machines
1.64 × 2 in (42 × 51 mm)0.66 mm359 mm30Fine detail: vinyl and paper only, weed with care
2.46 × 3 in (62 × 76 mm)0.99 mm539 mm12Fine detail: vinyl and paper only, weed with care
3.28 × 4 in (83 × 102 mm)1.3 mm718 mm6Vinyl, card and thin sheet
4.91 × 6 in (125 × 152 mm)2 mm1,077 mm2Vinyl, card and thin sheet
6.55 × 8 in (166 × 203 mm)2.6 mm1,437 mm1Vinyl, card and thin sheet
9.83 × 12 in (250 × 305 mm)4 mm2,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More zombie SVG files

← Shambling zombie silhouette All 13 zombies Zombie head with its brain showing →