Wifi sign in a heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A solid heart with the fan cut out of it, the arcs filling the two lobes and the dot sitting low towards the point. One piece, for a long-distance gift, a love-signal card or a sign for the home where the wifi connects by itself.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 653 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 78 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | Over 1.5 mm | 166 mm | 110 | Vinyl, card and thin sheet |
| 2 × 1.81 in (51 × 46 mm) | Over 3 mm | 332 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.71 in (76 × 69 mm) | Over 4.6 mm | 498 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.62 in (102 × 92 mm) | Over 6.1 mm | 663 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.42 in (152 × 138 mm) | Over 9.1 mm | 995 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.23 in (203 × 184 mm) | Over 12 mm | 1,327 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.85 in (305 × 276 mm) | Over 18 mm | 1,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wifi sign SVG files
-
Wifi router silhouette Solid · one piece -
Radio mast sending a wifi signal Solid · 7 pieces -
Layered wifi sign in two colours Layered · 5 pieces -
Classic wifi sign Solid · 4 pieces -
One-piece wifi sign Solid · one piece -
Bold wifi sign with square ends Solid · 4 pieces -
Thin line wifi sign with four arcs Solid · 5 pieces -
Wifi sign outline Outline · 4 pieces
← Wifi sign in a house All 16 wifi signs Wifi router silhouette →