Classic wifi sign SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A dot with three round-ended arcs widening above it, all drawn from the centre of the dot and spread 45 degrees to each side. Four loose pieces: lift them together with transfer tape to keep the spacing.
What is in the file
| Size | 100 × 77 mm (3.94 × 3.01 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 4 outlines |
| Cut length | 563 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 68 curve and line segments |
| Symmetry | Mirror |
| Also found as | Wifi symbol SVG |
Measured from the file. PNG: 2,000 × 1,548 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.77 in (25 × 19 mm) | Over 1.5 mm | 143 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.53 in (51 × 39 mm) | Over 3 mm | 286 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.3 in (76 × 58 mm) | Over 4.6 mm | 429 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.06 in (102 × 78 mm) | Over 6.1 mm | 572 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.59 in (152 × 117 mm) | Over 9.1 mm | 858 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.12 in (203 × 155 mm) | Over 12 mm | 1,144 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.18 in (305 × 233 mm) | Over 18 mm | 1,716 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wifi sign SVG files
-
One-piece wifi sign Solid · one piece -
Bold wifi sign with square ends Solid · 4 pieces -
Thin line wifi sign with four arcs Solid · 5 pieces -
Wifi sign outline Outline · 4 pieces -
Wifi sign in a solid circle Solid · one piece -
Wifi sign on a rounded square Solid · one piece -
Wifi sign in a cloud Solid · one piece -
Wifi sign at three signal strengths Solid · 9 pieces
← Layered wifi sign in two colours All 16 wifi signs One-piece wifi sign →