Free Wifey SVG

Wifey stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wifey stencil plate, as a solid black shape
Wifey stencil plate. The preview is the SVG file itself.

A rounded plate with “WIFEY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length788 mm at this size
Narrowest part4.7 mm at this size
Nodes113 curve and line segments

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)1.2 mm200 mm190Vinyl, card and thin sheet
2 × 0.86 in (51 × 22 mm)2.4 mm400 mm55Vinyl, card and thin sheet
3 × 1.29 in (76 × 33 mm)3.6 mm600 mm24Any material, including 3 mm wood and acrylic
4 × 1.72 in (102 × 44 mm)4.8 mm801 mm12Any material, including 3 mm wood and acrylic
6 × 2.57 in (152 × 65 mm)7.2 mm1,201 mm4Any material, including 3 mm wood and acrylic
8 × 3.43 in (203 × 87 mm)9.6 mm1,601 mm3Any material, including 3 mm wood and acrylic
12 × 5.15 in (305 × 131 mm)14 mm2,402 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wifey SVG files

← Wifey outline lettering All 13 Wifey designs Wifey with a drop shadow →