Free Wifey SVG

Wifey in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wifey in Amatic SC, as a solid black shape
Wifey in Amatic SC. The preview is the SVG file itself.

“Wifey” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces5 separate pieces
Outlines to cut5 outlines
Cut length846 mm at this size
Narrowest part3.4 mm at this size
Nodes222 curve and line segments

Measured from the file. PNG: 2,000 × 1,113 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.86 mm215 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.08 in (51 × 27 mm)1.7 mm430 mm45Vinyl, card and thin sheet
3 × 1.62 in (76 × 41 mm)2.6 mm645 mm18Vinyl, card and thin sheet
4 × 2.16 in (102 × 55 mm)3.5 mm860 mm10Any material, including 3 mm wood and acrylic
6 × 3.23 in (152 × 82 mm)5.2 mm1,289 mm3Any material, including 3 mm wood and acrylic
8 × 4.31 in (203 × 110 mm)6.9 mm1,719 mm2Any material, including 3 mm wood and acrylic
12 × 6.47 in (305 × 164 mm)10 mm2,579 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wifey SVG files

← Wifey in Alfa Slab One All 13 Wifey designs Wifey in block capitals →