Split Washington for a name SVG
Washington divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Washington are loose pieces: line them up with transfer tape.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.6 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 3: 2 outer edges and 1 cut-out |
| Cut length | 493 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 176 curve and line segments |
Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.56 mm | 125 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.32 in (51 × 34 mm) | 1.1 mm | 250 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.98 in (76 × 50 mm) | 1.7 mm | 376 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.64 in (102 × 67 mm) | 2.2 mm | 501 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.96 in (152 × 101 mm) | 3.4 mm | 751 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.28 in (203 × 134 mm) | 4.5 mm | 1,002 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.92 in (305 × 201 mm) | 6.7 mm | 1,503 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Washington SVG files
-
Washington in stripes Solid · 9 pieces -
Layered Washington on a hexagon Layered · 2 pieces -
Washington state silhouette Solid · one piece -
Washington state outline Outline · one piece -
Washington with a heart cut out Solid · one piece -
Washington cut from a disc Solid · one piece -
Washington cut from a square tile Solid · one piece -
Washington cut from a heart Solid · one piece
← Washington with its name beneath All 10 Washington designs Washington in stripes →