Free Washington SVG

Washington state silhouette SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Washington state silhouette, as a solid black shape
Washington state silhouette. The preview is the SVG file itself.

The state of Washington as a solid shape, 100 mm wide and 66 mm tall, drawn from the Census Bureau’s boundary file on a projection centred on the state. It is a single piece.

What is in the file

Size100 × 66 mm (3.94 × 2.6 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length368 mm at this size
Narrowest part1.2 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.3 mm93 mm140Too fine for most machines
2 × 1.32 in (51 × 34 mm)0.61 mm187 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.98 in (76 × 50 mm)0.91 mm280 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.64 in (102 × 67 mm)1.2 mm374 mm8Vinyl, card and thin sheet
6 × 3.96 in (152 × 101 mm)1.8 mm561 mm2Vinyl, card and thin sheet
8 × 5.28 in (203 × 134 mm)2.4 mm748 mm2Vinyl, card and thin sheet
12 × 7.92 in (305 × 201 mm)3.7 mm1,122 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Washington SVG files

← Layered Washington on a hexagon All 10 Washington designs Washington state outline →