Free Washington SVG

Washington with its name beneath SVG

Washington with its name beneath, as a solid black shape — Washington with its name beneath. The preview is the SVG file itself.

The solid state with “WASHINGTON” in narrow capitals under it. The letters of “Washington” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.4 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	16: 11 outer edges and 5 cut-outs
Cut length	941 mm at this size
Narrowest part	1.9 mm at this size
Nodes	383 curve and line segments

Measured from the file. PNG: 2,000 × 1,738 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	0.48 mm	239 mm	110	Too fine for most machines
2 × 1.73 in (51 × 44 mm)	0.97 mm	478 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.59 in (76 × 66 mm)	1.4 mm	717 mm	12	Vinyl, card and thin sheet
4 × 3.46 in (102 × 88 mm)	1.9 mm	956 mm	6	Vinyl, card and thin sheet
6 × 5.18 in (152 × 132 mm)	2.9 mm	1,434 mm	2	Vinyl, card and thin sheet
8 × 6.91 in (203 × 176 mm)	3.9 mm	1,912 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.37 in (305 × 263 mm)	5.8 mm	2,868 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Washington SVG files

← Washington cut from a heart All 10 Washington designs Split Washington for a name →