Free Viking SVG

Viking head with a beard SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Viking head with a beard, as a solid black shape
Viking head with a beard. The preview is the SVG file itself.

A Viking seen from the front: a horned helmet pulled low, two eyes under the brow either side of the nose guard, a moustache and a long beard cut with a few strands. One symmetrical piece.

What is in the file

Size100 × 98 mm (3.94 × 3.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length854 mm at this size
Narrowest part1 mm at this size
Nodes213 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.25 mm217 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.51 mm434 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)0.76 mm651 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.92 in (102 × 99 mm)1 mm868 mm4Vinyl, card and thin sheet
6 × 5.87 in (152 × 149 mm)1.5 mm1,301 mm2Vinyl, card and thin sheet
8 × 7.83 in (203 × 199 mm)2 mm1,735 mm1Vinyl, card and thin sheet
12 × 11.75 in (305 × 298 mm)3 mm2,603 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Viking SVG files

← Viking helmet with eye guards All 15 Vikings Viking horns, pair →