Free Viking SVG

Vegvisir wayfinder sign SVG

Vegvisir wayfinder sign, drawn as a line
Vegvisir wayfinder sign. The preview is the SVG file itself.

Eight staves from one centre, each ending in its own pattern of bars, forks, cups and loops, after the Icelandic wayfinder sign. An even line a little over 2 mm wide, for foil, engraving and pens.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.79 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,429 mm at this size
Narrowest part2.7 mm at this size
Nodes231 curve and line segments

Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.69 mm363 mm100Fine detail: vinyl and paper only, weed with care
1.93 × 2 in (49 × 51 mm)1.4 mm726 mm25Vinyl, card and thin sheet
2.89 × 3 in (73 × 76 mm)2.1 mm1,089 mm9Vinyl, card and thin sheet
3.85 × 4 in (98 × 102 mm)2.7 mm1,452 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)4.1 mm2,178 mm2Any material, including 3 mm wood and acrylic
7.7 × 8 in (196 × 203 mm)5.5 mm2,904 mm1Any material, including 3 mm wood and acrylic
11.56 × 12 in (294 × 305 mm)8.2 mm4,356 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Viking SVG files

← Viking shield with crossed axes All 15 Vikings Yggdrasil world tree in a ring →