Unicorn horn SVG
The horn on its own: a tall cone with seven twisted turns, each divided from the next by a slanted slit. For party hats, cake toppers and turning any animal into a unicorn.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 32 × 100 mm (1.26 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 368 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 152 curve and line segments |
Measured from the file. PNG: 690 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.32 × 1 in (8 × 25 mm) | 0.43 mm | 93 mm | 230 | Too fine for most machines |
| 0.64 × 2 in (16 × 51 mm) | 0.86 mm | 187 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 0.96 × 3 in (24 × 76 mm) | 1.3 mm | 280 mm | 30 | Vinyl, card and thin sheet |
| 1.28 × 4 in (32 × 102 mm) | 1.7 mm | 374 mm | 16 | Vinyl, card and thin sheet |
| 1.91 × 6 in (49 × 152 mm) | 2.6 mm | 561 mm | 5 | Vinyl, card and thin sheet |
| 2.55 × 8 in (65 × 203 mm) | 3.5 mm | 748 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.83 × 12 in (97 × 305 mm) | 5.2 mm | 1,122 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Unicorn eyelashes 
Cute round unicorn face 
Unicorn heart 
Unicorn head from the side 
Unicorn outline 
Mandala unicorn head 
Unicorn silhouette 
Chubby unicorn 