Unicorn horn and ears SVG
A horn between two ears on a curved band, like a party headband seen from the front. One piece: put it over a photo, a name or a pumpkin.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 77 mm (3.94 × 3.04 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 578 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 144 curve and line segments |
Measured from the file. PNG: 2,000 × 1,563 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.77 in (25 × 20 mm) | 0.38 mm | 147 mm | 120 | Too fine for most machines |
| 2 × 1.55 in (51 × 39 mm) | 0.76 mm | 294 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.32 in (76 × 59 mm) | 1.1 mm | 440 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.09 in (102 × 79 mm) | 1.5 mm | 587 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.64 in (152 × 118 mm) | 2.3 mm | 881 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.18 in (203 × 157 mm) | 3 mm | 1,174 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.28 in (305 × 236 mm) | 4.6 mm | 1,762 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Unicorn horn 
Unicorn eyelashes 
Cute round unicorn face 
Unicorn heart 
Unicorn head from the side 
Unicorn outline 
Mandala unicorn head 
Unicorn silhouette 