Free tuxedo SVG

Round tuxedo badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Round tuxedo badge. The preview is the SVG file itself.

A tuxedo front cut into a circle: the open shirt, the bow tie, three studs, lapel lines and a pocket square. For round stickers, favour bag seals, coasters and cupcake toppers.

What is in the file

Size	100 × 99 mm (3.94 × 3.9 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	921 mm at this size
Narrowest part	2.7 mm at this size
Nodes	68 curve and line segments

Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.69 mm	234 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.98 in (51 × 50 mm)	1.4 mm	468 mm	25	Vinyl, card and thin sheet
3 × 2.97 in (76 × 75 mm)	2.1 mm	702 mm	9	Vinyl, card and thin sheet
4 × 3.96 in (102 × 101 mm)	2.7 mm	936 mm	4	Vinyl, card and thin sheet
6 × 5.94 in (152 × 151 mm)	4.1 mm	1,404 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.92 in (203 × 201 mm)	5.5 mm	1,871 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.88 in (305 × 302 mm)	8.2 mm	2,807 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tuxedo SVG files

← Tuxedo vest with a bow tie All 15 tuxedos Tuxedo heart →