Tuxedo silhouette of a gentleman SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A man standing in a tailcoat and a top hat with one hand on a walking cane, on a flat strip of floor. One solid piece with no face, made for a shadow box, a cake topper or an invitation.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 48 × 100 mm (1.89 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 572 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 152 curve and line segments |
Measured from the file. PNG: 1,002 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.48 × 1 in (12 × 25 mm) | 0.86 mm | 145 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 0.96 × 2 in (24 × 51 mm) | 1.7 mm | 291 mm | 50 | Vinyl, card and thin sheet |
| 1.44 × 3 in (37 × 76 mm) | 2.6 mm | 436 mm | 21 | Vinyl, card and thin sheet |
| 1.92 × 4 in (49 × 102 mm) | 3.5 mm | 581 mm | 10 | Any material, including 3 mm wood and acrylic |
| 2.89 × 6 in (73 × 152 mm) | 5.2 mm | 872 mm | 3 | Any material, including 3 mm wood and acrylic |
| 3.85 × 8 in (98 × 203 mm) | 6.9 mm | 1,162 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.77 × 12 in (147 × 305 mm) | 10 mm | 1,743 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More tuxedo SVG files
-
Tuxedo front outline Outline · one piece -
Layered tuxedo front in four colours Layered · 7 pieces -
Tuxedo front with a bow tie Solid · one piece -
Tux bib of lapels, bow tie and studs Solid · one piece -
Suit and tie jacket Solid · one piece -
Striped tie for a suit Solid · one piece -
Neck tie with spots on a shirt collar Solid · one piece -
Tuxedo bow tie outline Outline · one piece