Free tree SVG

Round tree outline SVG

Round tree outline, drawn as a line
Round tree outline. The preview is the SVG file itself.

The round tree as a line about 2 mm wide: crown and trunk in one continuous outline. For colouring, tracing and foil.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size77 × 100 mm (3.02 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length625 mm at this size
Narrowest part2.1 mm at this size
Nodes152 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,554 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.53 mm159 mm120Fine detail: vinyl and paper only, weed with care
1.54 × 2 in (39 × 51 mm)1.1 mm318 mm35Vinyl, card and thin sheet
2.3 × 3 in (59 × 76 mm)1.6 mm476 mm12Vinyl, card and thin sheet
3.07 × 4 in (78 × 102 mm)2.1 mm635 mm6Vinyl, card and thin sheet
4.61 × 6 in (117 × 152 mm)3.2 mm952 mm2Any material, including 3 mm wood and acrylic
6.14 × 8 in (156 × 203 mm)4.3 mm1,270 mm1Any material, including 3 mm wood and acrylic
9.22 × 12 in (234 × 305 mm)6.4 mm1,905 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tree SVG files

← Three trees All 20 trees Oak tree outline →