Bare tree with even branches SVG
A leafless tree whose branches fork in two again and again, each pair turning up towards the light. Symmetric, so it sits well in the centre of a design.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 86 × 100 mm (3.39 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 901 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 280 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,735 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.86 × 1 in (22 × 25 mm) | 0.51 mm | 229 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.72 × 2 in (44 × 51 mm) | 1 mm | 458 mm | 30 | Vinyl, card and thin sheet |
| 2.59 × 3 in (66 × 76 mm) | 1.5 mm | 687 mm | 12 | Vinyl, card and thin sheet |
| 3.45 × 4 in (88 × 102 mm) | 2 mm | 915 mm | 6 | Vinyl, card and thin sheet |
| 5.17 × 6 in (131 × 152 mm) | 3 mm | 1,373 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.9 × 8 in (175 × 203 mm) | 4.1 mm | 1,831 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.34 × 12 in (263 × 305 mm) | 6.1 mm | 2,746 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Winter tree 
Tree with leaves on every branch 
Tree of life in a ring 
Tree of life with leaves 
Family tree 
Heart tree 
Swirly tree 
Weeping willow tree 