Family tree SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wide tree with a stout trunk and five boughs that fork into forty leafy tips. Broad enough to set a family name under it or to write a name beside each bough.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.66 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 964 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 318 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,377 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.51 mm | 245 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.35 in (51 × 34 mm) | 1 mm | 490 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.03 in (76 × 52 mm) | 1.5 mm | 735 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.7 in (102 × 69 mm) | 2 mm | 979 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.06 in (152 × 103 mm) | 3 mm | 1,469 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.41 in (203 × 137 mm) | 4.1 mm | 1,959 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.11 in (305 × 206 mm) | 6.1 mm | 2,938 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.