Free tree SVG

Oak tree outline SVG

Oak tree outline, drawn as a line
Oak tree outline. The preview is the SVG file itself.

The broad oak drawn as a single line around crown and trunk. Wide and low, so it frames a family name or a date underneath.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.93 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length751 mm at this size
Narrowest part2.3 mm at this size
Nodes175 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,998 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.58 mm191 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.2 mm382 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.8 mm572 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 101 mm)2.3 mm763 mm4Vinyl, card and thin sheet
6 × 5.99 in (152 × 152 mm)3.5 mm1,145 mm1Any material, including 3 mm wood and acrylic
8 × 7.99 in (203 × 203 mm)4.7 mm1,526 mm1Any material, including 3 mm wood and acrylic
12 × 11.99 in (305 × 304 mm)7 mm2,289 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tree SVG files

← Round tree outline All 20 trees Autumn tree with falling leaves →