Unicorn treat box with a horn SVG
A tall bag-topped box with ears and a horn on the front and back, sleepy eyes and round cheeks on the front. Tie the two horns together with ribbon. Cut 165 mm wide, the box is 47 mm wide, 31 mm deep and 63 mm tall below the head.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.16 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 69: 1 outer edge and 68 cut-outs |
| Cut length | 920 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 338 curve and line segments |
Measured from the file. PNG: 2,000 × 1,619 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.53 mm | 234 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.6 in (51 × 41 mm) | 1.1 mm | 467 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.41 in (76 × 61 mm) | 1.6 mm | 701 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.21 in (102 × 81 mm) | 2.1 mm | 935 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.81 in (152 × 122 mm) | 3.2 mm | 1,402 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.42 in (203 × 163 mm) | 4.3 mm | 1,869 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.62 in (305 × 244 mm) | 6.4 mm | 2,804 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More treat box SVG files
-
Easter treat box basket with a bunny Solid · 2 pieces -
Treat box template to print and cut by hand Outline · 45 pieces -
Santa treat box with a belt and buckle Layered · 4 pieces -
Treat box template with a tuck lid Solid · one piece -
Favour treat box with a petal top Solid · one piece -
Candy treat box with a window lid Solid · 2 pieces -
Pyramid treat box tied with ribbon Solid · one piece -
Take-out treat box with folded corners Solid · one piece
← Pumpkin treat box with a carved face All 12 treat boxes Easter treat box basket with a bunny →