Pyramid treat box tied with ribbon SVG
Four triangles round a square, each with a star, a tuck-in tab and a hole at its tip. Thread ribbon through the four holes and tie a bow: no glue. Cut 195 mm tall, the base is 56 mm square and the pyramid 61 mm tall.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 45: 1 outer edge and 44 cut-outs |
| Cut length | 725 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 240 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.48 mm | 184 mm | 100 | Too fine for most machines |
| 2 × 2 in (51 × 51 mm) | 0.97 mm | 368 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 3 in (76 × 76 mm) | 1.4 mm | 552 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 1.9 mm | 737 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 2.9 mm | 1,105 mm | 1 | Vinyl, card and thin sheet |
| 8 × 8 in (203 × 203 mm) | 3.9 mm | 1,473 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 5.8 mm | 2,210 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More treat box SVG files
-
Take-out treat box with folded corners Solid · one piece -
Christmas cracker treat box Solid · one piece -
Coffin treat box with a lid Solid · 2 pieces -
Pumpkin treat box with a carved face Solid · one piece -
Unicorn treat box with a horn Solid · one piece -
Easter treat box basket with a bunny Solid · 2 pieces -
Treat box template to print and cut by hand Outline · 45 pieces -
Santa treat box with a belt and buckle Layered · 4 pieces
← Candy treat box with a window lid All 12 treat boxes Take-out treat box with folded corners →