Free Thank You SVG

Thank You stencil plate SVG

Thank You stencil plate, as a solid black shape — Thank You stencil plate. The preview is the SVG file itself.

A rounded plate with “THANK YOU” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 94 mm (3.94 × 3.7 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,479 mm at this size
Narrowest part	1.3 mm at this size
Nodes	115 curve and line segments

Measured from the file. PNG: 2,000 × 1,885 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.94 in (25 × 24 mm)	0.33 mm	376 mm	100	Too fine for most machines
2 × 1.88 in (51 × 48 mm)	0.66 mm	751 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.82 in (76 × 72 mm)	0.99 mm	1,127 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.76 in (102 × 96 mm)	1.3 mm	1,503 mm	6	Vinyl, card and thin sheet
6 × 5.64 in (152 × 143 mm)	2 mm	2,254 mm	2	Vinyl, card and thin sheet
8 × 7.52 in (203 × 191 mm)	2.6 mm	3,005 mm	1	Vinyl, card and thin sheet
12 × 11.28 in (305 × 287 mm)	4 mm	4,508 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thank You SVG files

← Thank You outline lettering All 12 Thank You designs Thank You with a drop shadow →