Free Thank You SVG

Thank You in Amatic SC SVG

Thank You in Amatic SC, as a solid black shape — Thank You in Amatic SC. The preview is the SVG file itself.

“Thank You” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	85 × 100 mm (3.34 × 3.94 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	10: 8 outer edges and 2 cut-outs
Cut length	1,222 mm at this size
Narrowest part	1.5 mm at this size
Nodes	363 curve and line segments

Measured from the file. PNG: 1,708 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.85 × 1 in (22 × 25 mm)	0.38 mm	310 mm	110	Too fine for most machines
1.7 × 2 in (43 × 51 mm)	0.76 mm	621 mm	30	Fine detail: vinyl and paper only, weed with care
2.54 × 3 in (65 × 76 mm)	1.1 mm	931 mm	12	Vinyl, card and thin sheet
3.39 × 4 in (86 × 102 mm)	1.5 mm	1,242 mm	6	Vinyl, card and thin sheet
5.09 × 6 in (129 × 152 mm)	2.3 mm	1,862 mm	2	Vinyl, card and thin sheet
6.78 × 8 in (172 × 203 mm)	3 mm	2,483 mm	1	Any material, including 3 mm wood and acrylic
10.18 × 12 in (258 × 305 mm)	4.6 mm	3,725 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thank You SVG files

← Thank You in Alfa Slab One All 12 Thank You designs Thank You in block capitals →