Free Thank You SVG

Thank You in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Thank You in Lobster, as a solid black shape
Thank You in Lobster. The preview is the SVG file itself.

“Thank You” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 85 mm (3.94 × 3.34 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length920 mm at this size
Narrowest part1.6 mm at this size
Nodes197 curve and line segments

Measured from the file. PNG: 2,000 × 1,708 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.41 mm234 mm110Too fine for most machines
2 × 1.7 in (51 × 43 mm)0.81 mm467 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.54 in (76 × 65 mm)1.2 mm701 mm12Vinyl, card and thin sheet
4 × 3.39 in (102 × 86 mm)1.6 mm935 mm6Vinyl, card and thin sheet
6 × 5.09 in (152 × 129 mm)2.4 mm1,402 mm2Vinyl, card and thin sheet
8 × 6.78 in (203 × 172 mm)3.3 mm1,869 mm1Any material, including 3 mm wood and acrylic
12 × 10.18 in (305 × 258 mm)4.9 mm2,804 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thank You SVG files

← Thank You in Pacifico All 13 Thank You designs Thank You in Kaushan Script →