Free tennis SVG

Crossed tennis rackets with a ball SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Crossed tennis rackets with a ball, as a solid black shape
Crossed tennis rackets with a ball. The preview is the SVG file itself.

Two strung rackets crossed at the throat with a ball laid over the crossing. A slim gap is cut round whatever lies on top and stops short of the edges, so the three lift as one piece.

What is in the file

Size86 × 100 mm (3.37 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut69: 1 outer edge and 68 cut-outs
Cut length1,668 mm at this size
Narrowest part1 mm at this size
Nodes444 curve and line segments

Measured from the file. PNG: 1,721 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)0.25 mm424 mm110Too fine for most machines
1.71 × 2 in (43 × 51 mm)0.51 mm847 mm30Fine detail: vinyl and paper only, weed with care
2.57 × 3 in (65 × 76 mm)0.76 mm1,271 mm12Fine detail: vinyl and paper only, weed with care
3.42 × 4 in (87 × 102 mm)1 mm1,695 mm6Vinyl, card and thin sheet
5.13 × 6 in (130 × 152 mm)1.5 mm2,542 mm2Vinyl, card and thin sheet
6.84 × 8 in (174 × 203 mm)2 mm3,389 mm1Vinyl, card and thin sheet
10.26 × 12 in (261 × 305 mm)3 mm5,084 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tennis SVG files

← Tennis racket with strings All 13 tennis designs Tennis ball with seams →