Free tennis SVG

Tennis ball with seams SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tennis ball with seams, as a solid black shape
Tennis ball with seams. The preview is the SVG file itself.

A ball with its two seams cut as curves that sweep in from either side. The seams stop short of the edge, so the ball stays in one piece. Cut it from bright yellow, or lay white behind the seams.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length628 mm at this size
Narrowest part4.2 mm at this size
Nodes22 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)1.1 mm160 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)2.1 mm319 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)3.2 mm479 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)4.3 mm638 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)6.4 mm957 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)8.5 mm1,276 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)13 mm1,914 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tennis SVG files

← Crossed tennis rackets with a ball All 13 tennis designs Tennis racket and ball →