Take Me to the Mountains stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “TAKE ME TO THE MOUNTAINS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.82 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 21: 1 outer edge and 20 cut-outs |
| Cut length | 1,124 mm at this size |
| Narrowest part | 1.1 mm at this size |
| Nodes | 370 curve and line segments |
Measured from the file. PNG: 2,000 × 965 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.28 mm | 285 mm | 180 | Too fine for most machines |
| 2 × 0.92 in (51 × 23 mm) | 0.56 mm | 571 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.39 in (76 × 35 mm) | 0.84 mm | 856 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.85 in (102 × 47 mm) | 1.1 mm | 1,142 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.77 in (152 × 70 mm) | 1.7 mm | 1,713 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.7 in (203 × 94 mm) | 2.2 mm | 2,284 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.54 in (305 × 141 mm) | 3.4 mm | 3,426 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Take Me to the Mountains SVG files
-
Take Me to the Mountains with a drop shadow Layered · 12 pieces -
Take Me to the Mountains in Pacifico Solid · 7 pieces -
Take Me to the Mountains in Lobster Solid · 9 pieces -
Take Me to the Mountains in Kaushan Script Solid · 20 pieces -
Take Me to the Mountains in Lilita One Solid · 21 pieces -
Take Me to the Mountains in Alfa Slab One Solid · 19 pieces -
Take Me to the Mountains in Amatic SC Solid · 20 pieces -
Take Me to the Mountains in block capitals Solid · 20 pieces
← Take Me to the Mountains outline lettering All 12 Take Me to the Mountains designs Take Me to the Mountains with a drop shadow →