Take Me to the Mountains with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Take Me to the Mountains” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 43 mm (3.94 × 1.7 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 29: 12 outer edges and 17 cut-outs |
| Cut length | 1,621 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 809 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 906 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.43 in (25 × 11 mm) | 0.79 mm | 412 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.86 in (51 × 22 mm) | 1.6 mm | 823 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.29 in (76 × 33 mm) | 2.4 mm | 1,235 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.72 in (102 × 44 mm) | 3.1 mm | 1,647 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.59 in (152 × 66 mm) | 4.7 mm | 2,470 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.45 in (203 × 88 mm) | 6.3 mm | 3,294 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.17 in (305 × 131 mm) | 9.4 mm | 4,941 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Take Me to the Mountains SVG files
-
Take Me to the Mountains in Pacifico Solid · 7 pieces -
Take Me to the Mountains in Lobster Solid · 9 pieces -
Take Me to the Mountains in Kaushan Script Solid · 20 pieces -
Take Me to the Mountains in Lilita One Solid · 21 pieces -
Take Me to the Mountains in Alfa Slab One Solid · 19 pieces -
Take Me to the Mountains in Amatic SC Solid · 20 pieces -
Take Me to the Mountains in block capitals Solid · 20 pieces -
Take Me to the Mountains in script and capitals Solid · 16 pieces
← Take Me to the Mountains stencil plate All 12 Take Me to the Mountains designs Take Me to the Mountains in Pacifico →