Take Me to the Mountains in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Take Me to the Mountains” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 29 mm (3.94 × 1.15 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 28: 21 outer edges and 7 cut-outs |
| Cut length | 807 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 385 curve and line segments |
Measured from the file. PNG: 2,000 × 638 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.29 in (25 × 7 mm) | 0.51 mm | 205 mm | 240 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.58 in (51 × 15 mm) | 1 mm | 410 mm | 75 | Vinyl, card and thin sheet |
| 3 × 0.88 in (76 × 22 mm) | 1.5 mm | 615 mm | 33 | Vinyl, card and thin sheet |
| 4 × 1.17 in (102 × 30 mm) | 2 mm | 820 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.75 in (152 × 45 mm) | 3 mm | 1,230 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.34 in (203 × 59 mm) | 4.1 mm | 1,640 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.5 in (305 × 89 mm) | 6.1 mm | 2,460 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Take Me to the Mountains SVG files
-
Take Me to the Mountains in Alfa Slab One Solid · 19 pieces -
Take Me to the Mountains in Amatic SC Solid · 20 pieces -
Take Me to the Mountains in block capitals Solid · 20 pieces -
Take Me to the Mountains in script and capitals Solid · 16 pieces -
Take Me to the Mountains with stars Solid · 15 pieces -
Take Me to the Mountains outline lettering Outline · 23 pieces -
Take Me to the Mountains stencil plate Solid · one piece -
Take Me to the Mountains with a drop shadow Layered · 12 pieces
← Take Me to the Mountains in Kaushan Script All 12 Take Me to the Mountains designs Take Me to the Mountains in Alfa Slab One →