Free Taco Bout Cute SVG

Taco Bout Cute with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Taco Bout Cute with hearts, as a solid black shape
Taco Bout Cute with hearts. The preview is the SVG file itself.

“Taco Bout Cute” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size41 × 100 mm (1.63 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length844 mm at this size
Narrowest part0.9 mm at this size
Nodes276 curve and line segments

Measured from the file. PNG: 871 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.41 × 1 in (10 × 25 mm)0.23 mm214 mm190Too fine for most machines
0.83 × 2 in (21 × 51 mm)0.46 mm429 mm55Too fine for most machines
1.24 × 3 in (31 × 76 mm)0.69 mm643 mm24Fine detail: vinyl and paper only, weed with care
1.65 × 4 in (42 × 102 mm)0.91 mm858 mm12Fine detail: vinyl and paper only, weed with care
2.48 × 6 in (63 × 152 mm)1.4 mm1,286 mm4Vinyl, card and thin sheet
3.3 × 8 in (84 × 203 mm)1.8 mm1,715 mm3Vinyl, card and thin sheet
4.96 × 12 in (126 × 305 mm)2.7 mm2,573 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Taco Bout Cute SVG files

← Taco Bout Cute in script and capitals All 13 Taco Bout Cute designs Taco Bout Cute outline lettering →