Taco Bout Cute with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Taco Bout Cute” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 54 × 100 mm (2.13 × 3.94 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 23: 9 outer edges and 14 cut-outs |
| Cut length | 1,459 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 463 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 1,117 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.54 × 1 in (14 × 25 mm) | 0.94 mm | 371 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.08 × 2 in (27 × 51 mm) | 1.9 mm | 741 mm | 45 | Vinyl, card and thin sheet |
| 1.62 × 3 in (41 × 76 mm) | 2.8 mm | 1,112 mm | 18 | Vinyl, card and thin sheet |
| 2.16 × 4 in (55 × 102 mm) | 3.8 mm | 1,482 mm | 10 | Any material, including 3 mm wood and acrylic |
| 3.25 × 6 in (82 × 152 mm) | 5.6 mm | 2,224 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.33 × 8 in (110 × 203 mm) | 7.5 mm | 2,965 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.49 × 12 in (165 × 305 mm) | 11 mm | 4,447 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Taco Bout Cute SVG files
-
Taco Bout Cute with a taco Solid · 11 pieces
-
Taco Bout Cute in Pacifico Solid · 5 pieces
-
Taco Bout Cute in Lobster Solid · 5 pieces
-
Taco Bout Cute in Kaushan Script Solid · 12 pieces
-
Taco Bout Cute in Lilita One Solid · 12 pieces
-
Taco Bout Cute in Alfa Slab One Solid · 12 pieces
-
Taco Bout Cute in Amatic SC Solid · 12 pieces
-
Taco Bout Cute in block capitals Solid · 12 pieces
← Taco Bout Cute stencil plate All 13 Taco Bout Cute designs Taco Bout Cute with a taco →