Free Taco Bout Cute SVG

Taco Bout Cute in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Taco Bout Cute in Lobster, as a solid black shape — Taco Bout Cute in Lobster. The preview is the SVG file itself.

“Taco Bout Cute” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size	54 × 100 mm (2.12 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	9: 5 outer edges and 4 cut-outs
Cut length	914 mm at this size
Narrowest part	1.1 mm at this size
Nodes	374 curve and line segments

Measured from the file. PNG: 1,113 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.54 × 1 in (14 × 25 mm)	0.28 mm	232 mm	160	Too fine for most machines
1.08 × 2 in (27 × 51 mm)	0.56 mm	464 mm	45	Fine detail: vinyl and paper only, weed with care
1.62 × 3 in (41 × 76 mm)	0.84 mm	696 mm	18	Fine detail: vinyl and paper only, weed with care
2.16 × 4 in (55 × 102 mm)	1.1 mm	929 mm	10	Vinyl, card and thin sheet
3.23 × 6 in (82 × 152 mm)	1.7 mm	1,393 mm	3	Vinyl, card and thin sheet
4.31 × 8 in (110 × 203 mm)	2.2 mm	1,857 mm	2	Vinyl, card and thin sheet
6.47 × 12 in (164 × 305 mm)	3.4 mm	2,786 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Taco Bout Cute SVG files

← Taco Bout Cute in Pacifico All 12 Taco Bout Cute designs Taco Bout Cute in Kaushan Script →