Free submarine SVG

Submarine with a blank hull for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Submarine with a blank hull for a name. The preview is the SVG file itself.

A deep-bellied submarine drawn as an open frame, with a solid sail, masts, tail and screw. The hull is empty so a name, a boat’s number or a date can be set along it.

What is in the file

Size	100 × 50 mm (3.94 × 1.95 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	513 mm at this size
Narrowest part	2.2 mm at this size
Nodes	69 curve and line segments

Measured from the file. PNG: 2,000 × 1,029 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.56 mm	130 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 0.99 in (51 × 25 mm)	1.1 mm	261 mm	50	Vinyl, card and thin sheet
3 × 1.49 in (76 × 38 mm)	1.7 mm	391 mm	21	Vinyl, card and thin sheet
4 × 1.98 in (102 × 50 mm)	2.2 mm	521 mm	10	Vinyl, card and thin sheet
6 × 2.97 in (152 × 75 mm)	3.4 mm	782 mm	3	Any material, including 3 mm wood and acrylic
8 × 3.96 in (203 × 101 mm)	4.5 mm	1,042 mm	2	Any material, including 3 mm wood and acrylic
12 × 5.94 in (305 × 151 mm)	6.7 mm	1,564 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More submarine SVG files

← Submarine on a sonar screen All 12 submarines Submarine outline →