Free stripes SVG

Caution stripe band SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Caution stripe band, as a solid black shape
Caution stripe band. The preview is the SVG file itself.

A hazard band: slanted bars between two thin rails, 100 mm by 18 mm, in one piece. Cut it in black over yellow for warning tape, or run it round a sign as a border.

What is in the file

Size100 × 18 mm (3.94 × 0.71 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length532 mm at this size
Thinnest stripe2.2 mm at this size
Nodes38 curve and line segments
Symmetry2-fold rotation

Measured from the file. PNG: 2,000 × 423 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightThinnest stripeCut lengthFit on a 12 in sheetRule of thumb
1 × 0.18 in (25 × 5 mm)0.56 mm135 mm320Fine detail: vinyl and paper only, weed with care
2 × 0.36 in (51 × 9 mm)1.1 mm270 mm105Vinyl, card and thin sheet
3 × 0.54 in (76 × 14 mm)1.7 mm405 mm48Vinyl, card and thin sheet
4 × 0.72 in (102 × 18 mm)2.2 mm541 mm26Vinyl, card and thin sheet
6 × 1.08 in (152 × 27 mm)3.4 mm811 mm9Any material, including 3 mm wood and acrylic
8 × 1.44 in (203 × 37 mm)4.5 mm1,081 mm7Any material, including 3 mm wood and acrylic
12 × 2.16 in (305 × 55 mm)6.7 mm1,622 mm5Any material, including 3 mm wood and acrylic

The thinnest stripe is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More stripes SVG files

← Heart of horizontal stripes All 16 stripes Racing stripes →