Fish stripes for lures SVG
Eight tapered bars hanging from the top edge, long and short by turns, each leaning and bowing a little: the dark bars down the side of a perch. Wrap them round a lure or a tumbler.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.67 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 8 outlines |
| Cut length | 1,269 mm at this size |
| Thinnest stripe | 6 mm at this size |
| Nodes | 62 curve and line segments |
Measured from the file. PNG: 2,000 × 1,869 pixels, transparent. About the three file types.
How fine is it at your size?
Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Thinnest stripe | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 1.5 mm | 322 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.86 in (51 × 47 mm) | 3 mm | 645 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 2.8 in (76 × 71 mm) | 4.6 mm | 967 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.73 in (102 × 95 mm) | 6.1 mm | 1,289 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.59 in (152 × 142 mm) | 9.1 mm | 1,934 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.46 in (203 × 189 mm) | 12 mm | 2,579 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.18 in (305 × 284 mm) | 18 mm | 3,868 mm | 1 | Any material, including 3 mm wood and acrylic |
The thinnest stripe is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.
Stars and stripes 
Horizontal stripes 
Diagonal stripes 
Candy stripes 
Pinstripes 
Ticking stripes 
Graduated stripes 
Wavy stripes 