Free stop sign SVG

Stoplight hanging from a bracket SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stoplight hanging from a bracket, as a solid black shape
Stoplight hanging from a bracket. The preview is the SVG file itself.

A stoplight head on its own, hung from a clamp: a tall case, a hood each side of every lamp and three large open lamps. Cut it once in black and back the holes with colour.

What is in the file

Size53 × 100 mm (2.08 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length550 mm at this size
Narrowest part1.1 mm at this size
Nodes79 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,092 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.53 × 1 in (13 × 25 mm)0.28 mm140 mm160Too fine for most machines
1.06 × 2 in (27 × 51 mm)0.56 mm279 mm45Fine detail: vinyl and paper only, weed with care
1.58 × 3 in (40 × 76 mm)0.84 mm419 mm18Fine detail: vinyl and paper only, weed with care
2.11 × 4 in (54 × 102 mm)1.1 mm559 mm10Vinyl, card and thin sheet
3.17 × 6 in (80 × 152 mm)1.7 mm838 mm3Vinyl, card and thin sheet
4.22 × 8 in (107 × 203 mm)2.2 mm1,118 mm2Vinyl, card and thin sheet
6.34 × 12 in (161 × 305 mm)3.4 mm1,676 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More stop sign SVG files

← Traffic light signal on a pole All 15 stop signs Street sign with two blank blades →