Free stop sign SVG

Blank street sign for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blank street sign for a name, as a solid black shape
Blank street sign for a name. The preview is the SVG file itself.

One wide street blade on a short post, with a border line cut round it and a clear middle for a family name, a child’s name over a bedroom door or the name of a road.

What is in the file

Size100 × 80 mm (3.94 × 3.14 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length843 mm at this size
Narrowest part2.6 mm at this size
Nodes76 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)0.66 mm214 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.6 in (51 × 41 mm)1.3 mm428 mm30Vinyl, card and thin sheet
3 × 2.39 in (76 × 61 mm)2 mm642 mm12Vinyl, card and thin sheet
4 × 3.19 in (102 × 81 mm)2.6 mm856 mm6Vinyl, card and thin sheet
6 × 4.79 in (152 × 122 mm)4 mm1,285 mm2Any material, including 3 mm wood and acrylic
8 × 6.38 in (203 × 162 mm)5.3 mm1,713 mm1Any material, including 3 mm wood and acrylic
12 × 9.58 in (305 × 243 mm)7.9 mm2,569 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More stop sign SVG files

← Street sign with two blank blades All 15 stop signs Yield sign on a post →