Free softball SVG

Half softball SVG

Half softball, as a solid black shape — Half softball. The preview is the SVG file itself.

The left half of the ball seen side on, cut straight down the middle, with one seam and its six stitches. Pair it with half of another ball.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	50 × 100 mm (1.97 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	576 mm at this size
Narrowest part	2.5 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 1,038 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.5 × 1 in (13 × 25 mm)	0.64 mm	146 mm	170	Fine detail: vinyl and paper only, weed with care
1 × 2 in (25 × 51 mm)	1.3 mm	293 mm	50	Vinyl, card and thin sheet
1.5 × 3 in (38 × 76 mm)	1.9 mm	439 mm	21	Vinyl, card and thin sheet
2 × 4 in (51 × 102 mm)	2.5 mm	585 mm	10	Vinyl, card and thin sheet
3 × 6 in (76 × 152 mm)	3.8 mm	878 mm	3	Any material, including 3 mm wood and acrylic
4 × 8 in (102 × 203 mm)	5.1 mm	1,170 mm	2	Any material, including 3 mm wood and acrylic
6 × 12 in (152 × 305 mm)	7.6 mm	1,756 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More softball SVG files

← Heart-shaped softball All 16 softballs Softball monogram frame →