Free softball SVG

Softball diamond SVG

Softball diamond, as a solid black shape
Softball diamond. The preview is the SVG file itself.

The infield from above: a skinned diamond with three bases, home plate and the pitcher’s circle cut out of it. The circle is broken in four places so its middle stays put.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length544 mm at this size
Narrowest part2.9 mm at this size
Nodes92 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.74 mm138 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.5 mm276 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.2 mm415 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.9 mm553 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)4.4 mm829 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)5.9 mm1,105 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)8.8 mm1,658 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More softball SVG files

← Softball with a bow All 16 softballs Softball with stitches →