Free Sister SVG

Sister stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sister stencil plate, as a solid black shape
Sister stencil plate. The preview is the SVG file itself.

A rounded plate with “SISTER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 41 mm (3.94 × 1.59 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length786 mm at this size
Narrowest part1.7 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 2,000 × 856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.43 mm200 mm200Too fine for most machines
2 × 0.81 in (51 × 21 mm)0.86 mm399 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.21 in (76 × 31 mm)1.3 mm599 mm24Vinyl, card and thin sheet
4 × 1.62 in (102 × 41 mm)1.7 mm799 mm12Vinyl, card and thin sheet
6 × 2.43 in (152 × 62 mm)2.6 mm1,198 mm4Vinyl, card and thin sheet
8 × 3.24 in (203 × 82 mm)3.5 mm1,597 mm3Any material, including 3 mm wood and acrylic
12 × 4.86 in (305 × 123 mm)5.2 mm2,396 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Sister SVG files

← Sister outline lettering All 13 Sister designs Sister with a drop shadow →