Free Sister SVG

Sister in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sister in Amatic SC, as a solid black shape
Sister in Amatic SC. The preview is the SVG file itself.

“Sister” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 48 mm (3.94 × 1.91 in), scales to any size
Pieces6 separate pieces
Outlines to cut7: 6 outer edges and 1 cut-out
Cut length798 mm at this size
Narrowest part2.8 mm at this size
Nodes211 curve and line segments

Measured from the file. PNG: 2,000 × 1,008 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.71 mm203 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)1.4 mm405 mm50Vinyl, card and thin sheet
3 × 1.45 in (76 × 37 mm)2.1 mm608 mm21Vinyl, card and thin sheet
4 × 1.94 in (102 × 49 mm)2.8 mm811 mm10Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)4.3 mm1,216 mm3Any material, including 3 mm wood and acrylic
8 × 3.87 in (203 × 98 mm)5.7 mm1,622 mm2Any material, including 3 mm wood and acrylic
12 × 5.81 in (305 × 148 mm)8.5 mm2,432 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Sister SVG files

← Sister in Alfa Slab One All 13 Sister designs Sister in block capitals →