Ram sheep head with curled horns SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A ram seen from the front: a long nose, two ears and a pair of heavy horns that wind out, round and back in, with ridges cut across them. For signs and shirts.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.07 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 908 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 386 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,577 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.56 mm | 231 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.56 in (51 × 40 mm) | 1.1 mm | 461 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.34 in (76 × 59 mm) | 1.7 mm | 692 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.12 in (102 × 79 mm) | 2.2 mm | 923 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.68 in (152 × 119 mm) | 3.4 mm | 1,384 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.24 in (203 × 158 mm) | 4.5 mm | 1,845 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.36 in (305 × 238 mm) | 6.7 mm | 2,768 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.