Free seashell SVG

Conch seashell SVG

Conch seashell, as a solid black shape — Conch seashell. The preview is the SVG file itself.

A conch standing on its point: a stepped spire, a knobbed shoulder, a broad flared lip and the long opening cut out, with a few lines following the coil.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	63 × 100 mm (2.48 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	556 mm at this size
Narrowest part	2.4 mm at this size
Nodes	139 curve and line segments

Measured from the file. PNG: 1,290 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.63 × 1 in (16 × 25 mm)	0.61 mm	141 mm	140	Fine detail: vinyl and paper only, weed with care
1.26 × 2 in (32 × 51 mm)	1.2 mm	282 mm	40	Vinyl, card and thin sheet
1.89 × 3 in (48 × 76 mm)	1.8 mm	424 mm	15	Vinyl, card and thin sheet
2.52 × 4 in (64 × 102 mm)	2.4 mm	565 mm	8	Vinyl, card and thin sheet
3.79 × 6 in (96 × 152 mm)	3.7 mm	847 mm	3	Any material, including 3 mm wood and acrylic
5.05 × 8 in (128 × 203 mm)	4.9 mm	1,130 mm	2	Any material, including 3 mm wood and acrylic
7.57 × 12 in (192 × 305 mm)	7.3 mm	1,695 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More seashell SVG files

← Open clam seashell with a pearl All 14 seashells Nautilus seashell →