Free seashell SVG

Open clam seashell with a pearl SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Open clam seashell with a pearl, as a solid black shape
Open clam seashell with a pearl. The preview is the SVG file itself.

A clam seen from the side with its two ribbed halves hinged open and a round pearl sitting between them. Welded at the hinge and the pearl, so it is one piece.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length1,015 mm at this size
Narrowest part1 mm at this size
Nodes288 curve and line segments
Also found asClamshell SVG

Measured from the file. PNG: 2,000 × 1,813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.25 mm258 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.51 mm516 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)0.76 mm773 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.61 in (102 × 92 mm)1 mm1,031 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)1.5 mm1,547 mm2Vinyl, card and thin sheet
8 × 7.22 in (203 × 183 mm)2 mm2,062 mm1Vinyl, card and thin sheet
12 × 10.84 in (305 × 275 mm)3 mm3,094 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More seashell SVG files

← Pair of seashells for a mermaid top All 14 seashells Conch seashell →