Free school bus SVG

Split school bus for a name SVG

Split school bus for a name, as a solid black shape
Split school bus for a name. The preview is the SVG file itself.

The bus cut in two along its side with a clear band between the halves, where a name goes. Two pieces: the roof and windows, and the body and wheels.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.52 in), scales to any size
Pieces2 separate pieces
Outlines to cut13: 2 outer edges and 11 cut-outs
Cut length844 mm at this size
Narrowest part2.3 mm at this size
Nodes159 curve and line segments

Measured from the file. PNG: 2,000 × 1,306 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.58 mm214 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.28 in (51 × 32 mm)1.2 mm429 mm40Vinyl, card and thin sheet
3 × 1.92 in (76 × 49 mm)1.8 mm643 mm15Vinyl, card and thin sheet
4 × 2.56 in (102 × 65 mm)2.3 mm858 mm8Vinyl, card and thin sheet
6 × 3.83 in (152 × 97 mm)3.5 mm1,286 mm3Any material, including 3 mm wood and acrylic
8 × 5.11 in (203 × 130 mm)4.7 mm1,715 mm2Any material, including 3 mm wood and acrylic
12 × 7.67 in (305 × 195 mm)7 mm2,573 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More school bus SVG files

← School bus monogram frame All 12 school buses School bus on a name plaque →