Free schnauzer SVG

Schnauzer paw print badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Schnauzer paw print badge. The preview is the SVG file itself.

A paw print with the schnauzer face in place of the big pad and four toe pads above it. Five loose pieces set out in position, for car windows, kennel signs and grooming salon bags.

What is in the file

Size	98 × 100 mm (3.85 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	16: 5 outer edges and 11 cut-outs
Cut length	842 mm at this size
Narrowest part	1.5 mm at this size
Nodes	245 curve and line segments

Measured from the file. PNG: 1,956 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.38 mm	214 mm	100	Too fine for most machines
1.95 × 2 in (50 × 51 mm)	0.76 mm	428 mm	25	Fine detail: vinyl and paper only, weed with care
2.93 × 3 in (74 × 76 mm)	1.1 mm	642 mm	9	Vinyl, card and thin sheet
3.91 × 4 in (99 × 102 mm)	1.5 mm	855 mm	4	Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)	2.3 mm	1,283 mm	2	Vinyl, card and thin sheet
7.82 × 8 in (199 × 203 mm)	3 mm	1,711 mm	1	Any material, including 3 mm wood and acrylic
11.72 × 12 in (298 × 305 mm)	4.6 mm	2,566 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More schnauzer SVG files

← Schnauzer outline All 12 schnauzers Schnauzer monogram frame →