Free schnauzer SVG

Schnauzer outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Schnauzer outline, drawn as a line
Schnauzer outline. The preview is the SVG file itself.

The standing schnauzer as one even line about 2.5 mm wide in a closed loop: eyebrow, beard, skirt, leg furnishings and tail, with nothing inside. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 89 mm (3.94 × 3.49 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length973 mm at this size
Narrowest part2.5 mm at this size
Nodes321 curve and line segments

Measured from the file. PNG: 2,000 × 1,781 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.64 mm247 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.77 in (51 × 45 mm)1.3 mm494 mm30Vinyl, card and thin sheet
3 × 2.66 in (76 × 68 mm)1.9 mm741 mm12Vinyl, card and thin sheet
4 × 3.54 in (102 × 90 mm)2.5 mm989 mm6Vinyl, card and thin sheet
6 × 5.32 in (152 × 135 mm)3.8 mm1,483 mm2Any material, including 3 mm wood and acrylic
8 × 7.09 in (203 × 180 mm)5.1 mm1,977 mm1Any material, including 3 mm wood and acrylic
12 × 10.63 in (305 × 270 mm)7.6 mm2,966 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More schnauzer SVG files

← Schnauzer sitting on a bone All 12 schnauzers Schnauzer paw print badge →