Free ribbon SVG

Gold medal on a striped ribbon SVG

Gold medal on a striped ribbon, in layered colours
Gold medal on a striped ribbon. The preview is the SVG file itself.

A pin-on medal in four layers: a gold backing, a red ribbon with a pale stripe down the middle, and a bright medal face with a star cut out so the darker gold shows through.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size49 × 100 mm (1.91 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut5: 4 outer edges and 1 cut-out
Cut length744 mm at this size
Narrowest part4.6 mm at this size
Nodes48 curve and line segments
SymmetryMirror
Layers4: layer 1 backing, layer 2 ribbon, layer 3 stripe and layer 4 medal face

Measured from the file. PNG: 1,010 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)1.2 mm189 mm170Vinyl, card and thin sheet
0.97 × 2 in (25 × 51 mm)2.3 mm378 mm50Vinyl, card and thin sheet
1.45 × 3 in (37 × 76 mm)3.5 mm567 mm21Any material, including 3 mm wood and acrylic
1.94 × 4 in (49 × 102 mm)4.7 mm756 mm10Any material, including 3 mm wood and acrylic
2.91 × 6 in (74 × 152 mm)7 mm1,134 mm3Any material, including 3 mm wood and acrylic
3.88 × 8 in (99 × 203 mm)9.3 mm1,512 mm2Any material, including 3 mm wood and acrylic
5.82 × 12 in (148 × 305 mm)14 mm2,268 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ribbon SVG files

← Medal on a neck ribbon All 15 ribbons Award ribbon in a laurel wreath →