Free ribbon SVG

Gift ribbon with a bow SVG

Gift ribbon with a bow, as a solid black shape
Gift ribbon with a bow. The preview is the SVG file itself.

Ribbon tied round a parcel and seen from above: two bands cross at the middle under a bow with two open loops and two forked tails. Lay it over a square of any colour to make a present.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length873 mm at this size
Narrowest part2.3 mm at this size
Nodes91 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.58 mm222 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.2 mm443 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)1.8 mm665 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.3 mm887 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)3.5 mm1,330 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)4.7 mm1,774 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)7 mm2,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ribbon SVG files

← Curly ribbon streamers All 15 ribbons Ribbon spool with a loose end →