Reindeer names stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with the eight names cut through it in capitals, one to a line, every closed letter bridged so nothing drops out. One piece: tape it to a board and paint or spray through it. Cut 400 mm tall, the letters are 32 mm high.
What is in the file
| Size | 73 × 100 mm (2.85 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 48: 1 outer edge and 47 cut-outs |
| Cut length | 2,120 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 763 curve and line segments |
Measured from the file. PNG: 1,471 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (18 × 25 mm) | 0.33 mm | 538 mm | 130 | Too fine for most machines |
| 1.45 × 2 in (37 × 51 mm) | 0.66 mm | 1,077 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 2.17 × 3 in (55 × 76 mm) | 0.99 mm | 1,615 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 2.9 × 4 in (74 × 102 mm) | 1.3 mm | 2,154 mm | 6 | Vinyl, card and thin sheet |
| 4.35 × 6 in (110 × 152 mm) | 2 mm | 3,231 mm | 2 | Vinyl, card and thin sheet |
| 5.8 × 8 in (147 × 203 mm) | 2.6 mm | 4,308 mm | 2 | Vinyl, card and thin sheet |
| 8.7 × 12 in (221 × 305 mm) | 4 mm | 6,462 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More reindeer names SVG files
-
Reindeer names in an outline frame Outline · 48 pieces -
Layered reindeer names sign, tall Layered · 48 pieces -
Reindeer names in four pairs Solid · 47 pieces -
Reindeer names in a single column Solid · 50 pieces -
Reindeer names under a pair of antlers Solid · 52 pieces -
Reindeer names sign with antlers Solid · one piece -
Reindeer names Christmas tree Solid · 49 pieces -
Reindeer name plates, Dasher to Vixen Solid · 4 pieces
← Reindeer names as the call from the poem All 12 reindeer names designs Reindeer names in an outline frame →