Layered reindeer names sign, tall SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A tall sign in two layers: a red board with a pair of antlers at its head, and the eight names in white capitals in one column to lay on it. Cut the names from vinyl and the board from painted wood or card, and no letter needs a bridge.
What is in the file
| Size | 49 × 100 mm (1.93 × 3.94 in), scales to any size |
|---|---|
| Pieces | 48 separate pieces |
| Outlines to cut | 66: 48 outer edges and 18 cut-outs |
| Cut length | 1,693 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 613 curve and line segments |
| Layers | 2: sign and names |
Measured from the file. PNG: 1,017 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.49 × 1 in (12 × 25 mm) | 0.33 mm | 430 mm | 170 | Too fine for most machines |
| 0.98 × 2 in (25 × 51 mm) | 0.66 mm | 860 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 1.47 × 3 in (37 × 76 mm) | 0.99 mm | 1,290 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 1.96 × 4 in (50 × 102 mm) | 1.3 mm | 1,720 mm | 10 | Vinyl, card and thin sheet |
| 2.93 × 6 in (75 × 152 mm) | 2 mm | 2,580 mm | 3 | Vinyl, card and thin sheet |
| 3.91 × 8 in (99 × 203 mm) | 2.6 mm | 3,440 mm | 2 | Vinyl, card and thin sheet |
| 5.87 × 12 in (149 × 305 mm) | 4 mm | 5,160 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More reindeer names SVG files
-
Reindeer names in four pairs Solid · 47 pieces -
Reindeer names in a single column Solid · 50 pieces -
Reindeer names under a pair of antlers Solid · 52 pieces -
Reindeer names sign with antlers Solid · one piece -
Reindeer names Christmas tree Solid · 49 pieces -
Reindeer name plates, Dasher to Vixen Solid · 4 pieces -
Reindeer name plates, Comet to Blitzen Solid · 4 pieces -
Reindeer names in script Solid · 8 pieces
← Reindeer names in an outline frame All 12 reindeer names designs Reindeer names in four pairs →